Info: 'For each row, the left side is a pattern of modifier keys to match, and the right side is what to do to the character when that pattern is used to produce it. The modifier keys are Control, Option, Caps Lock, Shift, and Command (). '
2:
Bounds: x1=8, y1=184, x2=472, y2=200
Type: -120
Info: 'Meta means set the 8th (high or parity) bit of this character.'
3:
Bounds: x1=8, y1=80, x2=472, y2=112
Type: -120
Info: 'Unmodify means use the code that would have been produced if the same key were typed without holding down any modifier keys. '
4:
Bounds: x1=8, y1=120, x2=472, y2=136
Type: -120
Info: 'Caps means pretend that the Caps Lock key was down.'
5:
Bounds: x1=8, y1=144, x2=472, y2=176
Type: -120
Info: 'Ctrl means make this letter into the control character of the same name (actually: use only the low 5 bits).'
6:
Bounds: x1=8, y1=208, x2=472, y2=240
Type: -120
Info: 'If anything is entered as the Prefix string, it will be sent before the modified key.'
DITL_1012.txt
Items: (3 entries)
0:
Bounds: x1=75, y1=63, x2=125, y2=83
Type: 4
Info: 'OK'
1:
Bounds: x1=154, y1=63, x2=204, y2=83
Type: 4
Info: 'Cancel'
2:
Bounds: x1=75, y1=10, x2=216, y2=46
Type: -120
Info: 'Emergency Exit?'
DITL_1010.txt
Items: (2 entries)
0:
Bounds: x1=20, y1=65, x2=63, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=12, x2=236, y2=94
Type: -120
Info: '^0 ^1 ^2^3'
DITL_1009.txt
Items: (3 entries)
0:
Bounds: x1=165, y1=220, x2=245, y2=240
Type: 4
Info: 'OK'
1:
Bounds: x1=5, y1=10, x2=405, y2=105
Type: -120
Info: 'Enter the string to be sent to the line into the edit box and click on OK.To define unprintable characters like ESC, Bell, BS, DEL, ╔ enter a \ followed by the octal representation of the ASCII character desired. To enter a \ just double it.'
2:
Bounds: x1=5, y1=110, x2=405, y2=210
Type: -120
Info: 'Examples: BS: \10 LF: \12 CR: \15 ESC: \33 DEL: \177You cannot combine both characters and breaks in a single key macro. For a short break enter \break or \shortbreak and for a long break enter \longbreak'
DITL_1008.txt
Items: (51 entries)
0:
Bounds: x1=296, y1=184, x2=360, y2=208
Type: 4
Info: 'OK'
1:
Bounds: x1=112, y1=184, x2=184, y2=208
Type: 4
Info: 'Cancel'
2:
Bounds: x1=320, y1=72, x2=340, y2=88
Type: 5
Info: ''
3:
Bounds: x1=288, y1=72, x2=308, y2=88
Type: 5
Info: ''
4:
Bounds: x1=256, y1=72, x2=276, y2=88
Type: 5
Info: ''
5:
Bounds: x1=200, y1=72, x2=220, y2=88
Type: 5
Info: ''
6:
Bounds: x1=144, y1=72, x2=164, y2=88
Type: 5
Info: ''
7:
Bounds: x1=112, y1=72, x2=132, y2=88
Type: 5
Info: ''
8:
Bounds: x1=80, y1=72, x2=100, y2=88
Type: 5
Info: ''
9:
Bounds: x1=48, y1=72, x2=68, y2=88
Type: 5
Info: ''
10:
Bounds: x1=16, y1=72, x2=36, y2=88
Type: 5
Info: ''
11:
Bounds: x1=320, y1=96, x2=340, y2=112
Type: 5
Info: ''
12:
Bounds: x1=288, y1=96, x2=308, y2=112
Type: 5
Info: ''
13:
Bounds: x1=256, y1=96, x2=276, y2=112
Type: 5
Info: ''
14:
Bounds: x1=200, y1=96, x2=220, y2=112
Type: 5
Info: ''
15:
Bounds: x1=144, y1=96, x2=164, y2=112
Type: 5
Info: ''
16:
Bounds: x1=112, y1=96, x2=132, y2=112
Type: 5
Info: ''
17:
Bounds: x1=80, y1=96, x2=100, y2=112
Type: 5
Info: ''
18:
Bounds: x1=48, y1=96, x2=68, y2=112
Type: 5
Info: ''
19:
Bounds: x1=16, y1=96, x2=36, y2=112
Type: 5
Info: ''
20:
Bounds: x1=320, y1=120, x2=340, y2=136
Type: 5
Info: ''
21:
Bounds: x1=288, y1=120, x2=308, y2=136
Type: 5
Info: ''
22:
Bounds: x1=256, y1=120, x2=276, y2=136
Type: 5
Info: ''
23:
Bounds: x1=200, y1=120, x2=220, y2=136
Type: 5
Info: ''
24:
Bounds: x1=144, y1=120, x2=164, y2=136
Type: 5
Info: ''
25:
Bounds: x1=112, y1=120, x2=132, y2=136
Type: 5
Info: ''
26:
Bounds: x1=80, y1=120, x2=100, y2=136
Type: 5
Info: ''
27:
Bounds: x1=48, y1=120, x2=68, y2=136
Type: 5
Info: ''
28:
Bounds: x1=16, y1=120, x2=36, y2=136
Type: 5
Info: ''
29:
Bounds: x1=320, y1=144, x2=340, y2=160
Type: 5
Info: ''
30:
Bounds: x1=288, y1=144, x2=308, y2=160
Type: 5
Info: ''
31:
Bounds: x1=256, y1=144, x2=276, y2=160
Type: 5
Info: ''
32:
Bounds: x1=200, y1=144, x2=220, y2=160
Type: 5
Info: ''
33:
Bounds: x1=144, y1=144, x2=164, y2=160
Type: 5
Info: ''
34:
Bounds: x1=112, y1=144, x2=132, y2=160
Type: 5
Info: ''
35:
Bounds: x1=80, y1=144, x2=100, y2=160
Type: 5
Info: ''
36:
Bounds: x1=48, y1=144, x2=68, y2=160
Type: 5
Info: ''
37:
Bounds: x1=16, y1=144, x2=40, y2=160
Type: 5
Info: ''
38:
Bounds: x1=352, y1=72, x2=464, y2=88
Type: 16
Info: ''
39:
Bounds: x1=352, y1=96, x2=464, y2=112
Type: 16
Info: ''
40:
Bounds: x1=352, y1=120, x2=464, y2=136
Type: 16
Info: ''
41:
Bounds: x1=352, y1=144, x2=464, y2=160
Type: 16
Info: ''
42:
Bounds: x1=8, y1=64, x2=176, y2=65
Type: 0
Info: ''
43:
Bounds: x1=176, y1=64, x2=177, y2=168
Type: 0
Info: ''
44:
Bounds: x1=176, y1=64, x2=466, y2=65
Type: 0
Info: ''
45:
Bounds: x1=8, y1=168, x2=466, y2=169
Type: 0
Info: ''
46:
Bounds: x1=8, y1=40, x2=162, y2=56
Type: 8
Info: 'Ctrl Opt Lock Shift '
47:
Bounds: x1=176, y1=40, x2=456, y2=56
Type: 8
Info: 'Unmodify Caps Ctrl Meta Prefix string:'
48:
Bounds: x1=8, y1=16, x2=160, y2=32
Type: -120
Info: 'Modifier Pattern: -->'
49:
Bounds: x1=176, y1=16, x2=472, y2=32
Type: -120
Info: 'Modification: (default is modified as typed)'
50:
Bounds: x1=208, y1=184, x2=272, y2=208
Type: 4
Info: 'Help'
DITL_1007.txt
Items: (4 entries)
0:
Bounds: x1=210, y1=65, x2=290, y2=85
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=65, x2=100, y2=85
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=15, x2=295, y2=50
Type: 16
Info: ''
3:
Bounds: x1=115, y1=65, x2=195, y2=85
Type: 4
Info: 'Help'
DITL_1006.txt
Items: (3 entries)
0:
Bounds: x1=235, y1=115, x2=315, y2=135
Type: 4
Info: 'OK'
1:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -128
Info: ''
2:
Bounds: x1=15, y1=20, x2=345, y2=35
Type: 8
Info: ''
DITL_1005.txt
Items: (16 entries)
0:
Bounds: x1=304, y1=208, x2=384, y2=232
Type: 4
Info: 'OK'
1:
Bounds: x1=208, y1=208, x2=288, y2=232
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=130, y2=26
Type: -120
Info: 'Terminal Settings'
3:
Bounds: x1=24, y1=64, x2=168, y2=80
Type: 5
Info: 'Auto Wrap around'
4:
Bounds: x1=24, y1=88, x2=160, y2=104
Type: 5
Info: 'Auto Repeat Keys'
5:
Bounds: x1=208, y1=40, x2=336, y2=56
Type: 5
Info: 'Inverted Screen'
6:
Bounds: x1=208, y1=112, x2=344, y2=128
Type: 5
Info: 'Smooth Scrolling'
7:
Bounds: x1=24, y1=40, x2=152, y2=56
Type: 5
Info: 'Auto LF with CR'
8:
Bounds: x1=208, y1=64, x2=304, y2=80
Type: 5
Info: 'Local Echo'
9:
Bounds: x1=208, y1=136, x2=380, y2=152
Type: 5
Info: 'Symbolic Control Chars'
10:
Bounds: x1=24, y1=112, x2=128, y2=128
Type: 5
Info: 'Block Cursor'
11:
Bounds: x1=208, y1=88, x2=368, y2=104
Type: 5
Info: 'Mouse -> Arrow Keys'
12:
Bounds: x1=208, y1=160, x2=304, y2=176
Type: 5
Info: 'Visible Bell'
13:
Bounds: x1=24, y1=160, x2=200, y2=176
Type: 5
Info: 'Extended Character Set'
14:
Bounds: x1=24, y1=136, x2=144, y2=152
Type: 5
Info: 'Blinking Cursor'
15:
Bounds: x1=24, y1=208, x2=136, y2=232
Type: 4
Info: 'Reset Terminal'
DITL_1004.txt
Items: (15 entries)
0:
Bounds: x1=79, y1=222, x2=159, y2=242
Type: 4
Info: 'OK'
1:
Bounds: x1=190, y1=222, x2=270, y2=242
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=93, y2=26
Type: -120
Info: 'File Settings'
3:
Bounds: x1=10, y1=45, x2=325, y2=65
Type: 6
Info: 'Attended: dialog on each file received.'
4:
Bounds: x1=10, y1=75, x2=330, y2=95
Type: 6
Info: 'Unattended: with the following defaults...'
5:
Bounds: x1=30, y1=100, x2=335, y2=115
Type: 6
Info: 'Supersede existing files of the same name.'
6:
Bounds: x1=30, y1=120, x2=320, y2=135
Type: 6
Info: 'Create new file names to avoid conflicts.'
7:
Bounds: x1=25, y1=175, x2=70, y2=190
Type: -120
Info: 'Mode:'
8:
Bounds: x1=175, y1=175, x2=210, y2=190
Type: -120
Info: 'Fork:'
9:
Bounds: x1=410, y1=48, x2=426, y2=56
Type: -120
Info: '-'
10:
Bounds: x1=220, y1=175, x2=270, y2=190
Type: 6
Info: 'Data'
11:
Bounds: x1=220, y1=190, x2=300, y2=205
Type: 6
Info: 'Resource'
12:
Bounds: x1=80, y1=175, x2=125, y2=190
Type: 6
Info: 'Text'
13:
Bounds: x1=80, y1=190, x2=140, y2=205
Type: 6
Info: 'Binary'
14:
Bounds: x1=10, y1=145, x2=220, y2=160
Type: 5
Info: 'Keep partially received files'
DITL_1003.txt
Items: (8 entries)
0:
Bounds: x1=100, y1=83, x2=185, y2=113
Type: 4
Info: 'Do It'
1:
Bounds: x1=203, y1=83, x2=288, y2=113
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=5, x2=298, y2=21
Type: -120
Info: 'Remote command is ^0'
3:
Bounds: x1=8, y1=31, x2=83, y2=47
Type: -120
Info: '^1'
4:
Bounds: x1=90, y1=31, x2=365, y2=47
Type: 16
Info: ''
5:
Bounds: x1=8, y1=56, x2=83, y2=72
Type: -120
Info: '^2'
6:
Bounds: x1=90, y1=57, x2=365, y2=73
Type: 16
Info: ''
7:
Bounds: x1=30, y1=120, x2=352, y2=136
Type: -120
Info: 'Emergency exit: hold down and type a period.'
DITL_1002.txt
Items: (35 entries)
0:
Bounds: x1=320, y1=225, x2=390, y2=245
Type: 4
Info: 'OK'
1:
Bounds: x1=320, y1=255, x2=390, y2=275
Type: 4
Info: 'Cancel'
2:
Bounds: x1=5, y1=5, x2=182, y2=21
Type: -120
Info: 'Protocol Settings'
3:
Bounds: x1=5, y1=35, x2=135, y2=50
Type: -120
Info: 'Block Check Type'
4:
Bounds: x1=144, y1=35, x2=199, y2=50
Type: 6
Info: '1'
5:
Bounds: x1=207, y1=35, x2=262, y2=50
Type: 6
Info: '2'
6:
Bounds: x1=271, y1=35, x2=326, y2=50
Type: 6
Info: '3'
7:
Bounds: x1=5, y1=57, x2=135, y2=72
Type: -120
Info: 'Handshake'
8:
Bounds: x1=332, y1=57, x2=387, y2=72
Type: 6
Info: 'Bell'
9:
Bounds: x1=144, y1=57, x2=199, y2=72
Type: 6
Info: 'CR'
10:
Bounds: x1=271, y1=57, x2=326, y2=72
Type: 6
Info: 'ESC'
11:
Bounds: x1=207, y1=57, x2=262, y2=72
Type: 6
Info: 'LF'
12:
Bounds: x1=271, y1=79, x2=326, y2=94
Type: 6
Info: 'None'
13:
Bounds: x1=144, y1=79, x2=199, y2=94
Type: 6
Info: 'XON'
14:
Bounds: x1=207, y1=79, x2=261, y2=94
Type: 6
Info: 'XOFF'
15:
Bounds: x1=237, y1=114, x2=313, y2=146
Type: -120
Info: 'SEND (outbound)'
16:
Bounds: x1=156, y1=113, x2=224, y2=146
Type: -120
Info: 'RECEIVE (inbound)'
17:
Bounds: x1=11, y1=152, x2=148, y2=168
Type: -120
Info: 'Start of packet char'
18:
Bounds: x1=180, y1=152, x2=200, y2=168
Type: 16
Info: ''
19:
Bounds: x1=21, y1=173, x2=148, y2=189
Type: -120
Info: 'End of packet char'
20:
Bounds: x1=180, y1=173, x2=200, y2=189
Type: 16
Info: ''
21:
Bounds: x1=87, y1=195, x2=148, y2=212
Type: -120
Info: 'Pad char'
22:
Bounds: x1=180, y1=194, x2=200, y2=210
Type: 16
Info: ''
23:
Bounds: x1=92, y1=215, x2=148, y2=232
Type: -120
Info: 'Padding'
24:
Bounds: x1=180, y1=215, x2=200, y2=231
Type: 16
Info: ''
25:
Bounds: x1=11, y1=236, x2=148, y2=252
Type: -120
Info: 'Seconds for timeout '
26:
Bounds: x1=180, y1=236, x2=200, y2=252
Type: 16
Info: ''
27:
Bounds: x1=53, y1=258, x2=148, y2=274
Type: -120
Info: 'Packet length'
28:
Bounds: x1=180, y1=257, x2=220, y2=273
Type: 16
Info: ''
29:
Bounds: x1=260, y1=152, x2=280, y2=168
Type: 16
Info: ''
30:
Bounds: x1=260, y1=173, x2=280, y2=189
Type: 16
Info: ''
31:
Bounds: x1=260, y1=194, x2=280, y2=210
Type: 16
Info: ''
32:
Bounds: x1=260, y1=215, x2=280, y2=231
Type: 16
Info: ''
33:
Bounds: x1=260, y1=236, x2=280, y2=252
Type: 16
Info: ''
34:
Bounds: x1=260, y1=257, x2=300, y2=273
Type: 16
Info: ''
DITL_1001.txt
Items: (20 entries)
0:
Bounds: x1=105, y1=165, x2=185, y2=185
Type: 4
Info: 'OK'
1:
Bounds: x1=205, y1=165, x2=285, y2=185
Type: 4
Info: 'Cancel'
2:
Bounds: x1=5, y1=5, x2=172, y2=21
Type: -120
Info: 'Communications Settings'
3:
Bounds: x1=5, y1=35, x2=75, y2=50
Type: -120
Info: 'Baud Rate'
4:
Bounds: x1=80, y1=35, x2=130, y2=50
Type: 6
Info: '300'
5:
Bounds: x1=155, y1=35, x2=205, y2=50
Type: 6
Info: '600'
6:
Bounds: x1=230, y1=35, x2=280, y2=50
Type: 6
Info: '1200'
7:
Bounds: x1=305, y1=35, x2=355, y2=50
Type: 6
Info: '1800'
8:
Bounds: x1=80, y1=55, x2=130, y2=70
Type: 6
Info: '2400'
9:
Bounds: x1=155, y1=55, x2=205, y2=70
Type: 6
Info: '4800'
10:
Bounds: x1=230, y1=55, x2=280, y2=70
Type: 6
Info: '7200'
11:
Bounds: x1=305, y1=55, x2=355, y2=70
Type: 6
Info: '9600'
12:
Bounds: x1=80, y1=75, x2=140, y2=90
Type: 6
Info: '19.2K'
13:
Bounds: x1=155, y1=75, x2=215, y2=90
Type: 6
Info: '57.6K'
14:
Bounds: x1=5, y1=125, x2=48, y2=141
Type: -120
Info: 'Parity'
15:
Bounds: x1=255, y1=125, x2=312, y2=141
Type: 6
Info: 'Mark'
16:
Bounds: x1=319, y1=125, x2=384, y2=141
Type: 6
Info: 'Space'
17:
Bounds: x1=80, y1=125, x2=130, y2=141
Type: 6
Info: 'Even'
18:
Bounds: x1=140, y1=125, x2=190, y2=141
Type: 6
Info: 'Odd'
19:
Bounds: x1=197, y1=125, x2=251, y2=141
Type: 6
Info: 'None'
DITL_257.txt
Items: (25 entries)
0:
Bounds: x1=312, y1=248, x2=376, y2=272
Type: 4
Info: 'OK'
1:
Bounds: x1=16, y1=8, x2=410, y2=24
Type: -120
Info: ''
2:
Bounds: x1=56, y1=26, x2=410, y2=42
Type: -120
Info: ''
3:
Bounds: x1=176, y1=192, x2=248, y2=208
Type: -120
Info: ''
4:
Bounds: x1=176, y1=208, x2=248, y2=224
Type: -120
Info: ''
5:
Bounds: x1=176, y1=224, x2=248, y2=240
Type: -120
Info: ''
6:
Bounds: x1=176, y1=240, x2=248, y2=256
Type: -120
Info: ''
7:
Bounds: x1=42, y1=192, x2=162, y2=208
Type: -120
Info: 'Transaction time (seconds)'
8:
Bounds: x1=16, y1=208, x2=160, y2=224
Type: -120
Info: 'Characters from line'
9:
Bounds: x1=34, y1=224, x2=162, y2=240
Type: -120
Info: 'Characters to line'
10:
Bounds: x1=17, y1=240, x2=161, y2=256
Type: -120
Info: 'Effective characters'
11:
Bounds: x1=56, y1=44, x2=410, y2=60
Type: -120
Info: '⌐1986, 1988 Columbia University, All Rights Reserved'
12:
Bounds: x1=16, y1=26, x2=48, y2=58
Type: -96
Info: 'Φ'
13:
Bounds: x1=80, y1=72, x2=112, y2=104
Type: -96
Info: '╨'
14:
Bounds: x1=48, y1=104, x2=139, y2=120
Type: -120
Info: 'Bill Catchings'
15:
Bounds: x1=288, y1=72, x2=320, y2=104
Type: -96
Info: '╤'
16:
Bounds: x1=272, y1=104, x2=339, y2=120
Type: -120
Info: 'Bill Schilit'
17:
Bounds: x1=184, y1=72, x2=216, y2=104
Type: -96
Info: '╥'
18:
Bounds: x1=152, y1=104, x2=248, y2=120
Type: -120
Info: 'Frank da Cruz'
19:
Bounds: x1=48, y1=160, x2=144, y2=176
Type: -120
Info: 'Matthias Aebi'
20:
Bounds: x1=80, y1=128, x2=112, y2=160
Type: -96
Info: '╙'
21:
Bounds: x1=184, y1=128, x2=216, y2=160
Type: -96
Info: '╘'
22:
Bounds: x1=152, y1=160, x2=251, y2=177
Type: -120
Info: 'Paul Placeway'
23:
Bounds: x1=24, y1=256, x2=160, y2=272
Type: -120
Info: 'Effective baud rate'
24:
Bounds: x1=176, y1=256, x2=248, y2=272
Type: -120
Info: ''
DITL_230.txt
Items: (21 entries)
0:
Bounds: x1=88, y1=184, x2=180, y2=216
Type: 4
Info: 'Cancel File'
1:
Bounds: x1=192, y1=184, x2=284, y2=216
Type: 4
Info: 'Cancel Group'
2:
Bounds: x1=8, y1=8, x2=77, y2=24
Type: -120
Info: 'Receiving'
3:
Bounds: x1=80, y1=8, x2=268, y2=25
Type: -120
Info: ''
4:
Bounds: x1=48, y1=32, x2=74, y2=49
Type: -120
Info: 'As'
5:
Bounds: x1=80, y1=32, x2=268, y2=49
Type: -120
Info: ''
6:
Bounds: x1=8, y1=56, x2=62, y2=73
Type: -120
Info: 'KBytes:'
7:
Bounds: x1=63, y1=56, x2=126, y2=73
Type: -120
Info: ''
8:
Bounds: x1=136, y1=56, x2=196, y2=73
Type: -120
Info: 'Packets:'
9:
Bounds: x1=200, y1=56, x2=256, y2=73
Type: -120
Info: ''
10:
Bounds: x1=272, y1=56, x2=327, y2=73
Type: -120
Info: 'Retries:'
11:
Bounds: x1=328, y1=56, x2=375, y2=73
Type: -120
Info: ''
12:
Bounds: x1=288, y1=32, x2=357, y2=49
Type: -120
Info: ''
13:
Bounds: x1=288, y1=8, x2=379, y2=24
Type: -120
Info: ''
14:
Bounds: x1=24, y1=136, x2=355, y2=170
Type: -120
Info: 'Emergency exit: hold down and type a period.'